Skip to main content

Recent comments

Submitted by Billy on

Permalink

Sorry, but I didn't find this video all that inspirational or even interesting. All the close-ups, blurring the camera lens and all the fancy film work actually takes away from the beauty of the sport. Look around you and the beauty is right there. You don't need all the other stuff; just film it as it happens.

Tove,

Klarälven is actually a very nice water to fish, and your family is lucky to have a cabin on its banks. The grayling fishing is probably the most renown fishing here, but both trout and salmon can be caught in the river.

You can find plenty information online most of it in Swedish like on the web page of http://klaralvfisk.se/ Sysselbackens Fiskevard.

Hope this helps.

Martin

Submitted by Tove Bolstad on

Permalink

I wonder what sorts of fish you can get in Klarälven ? My daughter, my son in law and my grandchildren have bought a summerhouse in Uggenås and they are living by the stream for holiday. They want to learn about fishing in Klara. We used to fish forell in Norwegian streams. Pardon my bad English, I`m an old lady and I have forgotten a lot of what I learned in school 60 years ago.
Grandma.

agree with kaspers view. i was dissapointed watching it. it was like a cocktail or better say mess. Those places are familiar to me and they definetely chose not the best rivers forsteelhead fishing.... strange..

i would vote 2 out of 6

Submitted by Aquiles Devett… on

Permalink

beautifull!! I´m from Villaguay ER, I didn´t know that dorados could be fishing with flies in the lake, I fish dorados in the Uruguay river near Salto ROU and in the Paraná river near Rincón SF. Where did you enter to the coast?
thanks Aquiles

Submitted by Everglades_Angler on

Permalink

Flies are nice for fun, but vanilla cornmeal balls are a sure strike for carp.

mix cornmeal, flour, corn starch with real vanilla extract and hot water. form into balls powder with starch and (somehow) manage to keep it on a hook for a cast. The carp will strike, no doubt.

Max,

I don't really understand your argumentation... especially not the rod comparison.

When you refer to quality are we then talking finish, craftsmanship, durability, design or...? Quality is in the eye of the beholder. I think my 20 US$ Pflueger is great quality as is my not-quite-so-20-dollars hand and custom made LAW reel. Is the LAW better quality than the Pfleuger? Sure it is! But is it 30 or 40 times better as the price indicates?

What I say is that no reel - and I mean NO reel - requires so much work and so expensive materials that it can be transferred directly into a price tag of several thousand dollars.
That is pure Damien Hirst!
There are lots of reasonable reels out there, which are both well finished, well made, durable, nicely designed and are sold at reasonable prices and not the price of a family car.

Sure you can find this phenomenon anywhere: expensive bikes, cameras, watches and whatnot. Prices are set to what people are willing to pay. If your reels sell fine at 500 US$ why would you lower the price to 100? You might still make a margin at 100, but the nature of business is to make as large a margin as possible.

Well, luckily we're entitled to our own opinions, and while you might think that a Charlton reel is great at 1000 US$ or more, I'll stick to my trusty Okuma's and get about 10 reels for the same price - or one reel and a nice fishing trip.

Martin

Submitted by Max Power on

Permalink

Again Sir, since you obviously have absolutely no quality sense by comparing a cheap china made bicycle hub with a machined fly reel, I'd like to draw your attention to the fact that you can buy a 10 meters long telescopic match rod in Germany for approx. £30. In your mind, what objectives justify then that I should spend £600 on a new G.Loomis NRX rod which is only 2.75 meters long..? Yours beautifully, Max

Submitted by Jannik Nielsen on

Permalink

Oh Leo, that is the best looking shrimpfly you have ever created. looking forward to see you catch many big seatrout this fall, when we go fishing together. Maby someday, i will come by your house, and get some off your rubber legs.
See you, my friend.

Submitted by Ernie Brazda on

Permalink

I hope Darrel reads this peace of literature. I miss the old man,the Rocky Ford is the place where we hooked the nicest fish ever. that fish took an 18 dry fly and ran to my backing. It was a great one and we had a great time!!!!!

Hei Atli,
Thanks for reply!
I have the greatest catapult setup that I discovered. Vision cheap shooting head + thin running line + stripping basket! Tested in Sweden- will be great in Denmark ;)
I guess I will bring 4wt single hander and two DH rods #6 and #8 with scandi/skagit setup for salmons.
By the way I can not found almost any information about license prices in Denmark. I know only that sea fishing license cost 120DKK. Any information about rivers when salmon season starts?
I think I also bring a lot of tying material with me. This is for that case if I don't find any work soon :) So no problem with flies!
Maybe someone know is there any fishing tackle shop in Aarhus?
Thanks again! :idea:

It iis not my line and I actually didn't see it. SA Professional Full Sinking WF-6-S type 6. Thats what I know. I'm waiting fom for the line to arrive and will put my old rod on risk. I considered sand to be a cause but don't know. I got my finger cut by sand while fishind SA Sharkskin. I'll keep you informed.
Regards
Michal

Hi,
a few years ago i found in a Hobby Shop in Berlin that material called (of course in german (or denglish :^))) "Stretchgummi" and sold in different thicknesses.

I guess it is used for small chains and can pulled over the wrist, because it is flexible.
...

There is also a nice article on this website from Steve Schweitzer .. he used as ribbung a material called: "Stretch Magic" ... i guess that is the same stuff like Stretchgummi.

Best regards from Berlin - Thomas

PS: It seems that Kern's Shrimp not only catch fish ... also the fisherman too :^)

Hans,

I can't say that the Scandinavian rods have any advantages. I have seen both Sage, Scott and other US rods rigged for saltwater, and they do the job as good - and maybe even better.

You can use fresh water rigged rods in the salt if you take care of them, but shy away from wooden inserts, fine silver nickel reel seats and other delicate details.

Martin

Michal,

It's an amazing story!
I can't see how any line could mar both your guides and the reel in that way. I have never seen anything like it!

What line was it if you don't mind me asking?
What type of fishing - particularly the water. Dirty, with silt, very salty?
Did you strip in any way extreme - like really fast two hand retrieve?

Let's know how this develops.

Martin

Erik and Tob,

The rubber that Kern is using was found at his workplace on the spool. No one know what it is and where it came from. Kern is now trying to find out even though he has several kilometers.

Clear flexi legs might be available at Go-Fishing.

Kasper

Hi Sarunas,

No doubt your 6/7 weight Catapult, combined with a floating WF or shooting head, will cover most of your needs in Denmark. But there is (a bit) more to Denmark than coastal fishing; there are a few streams (most of them in Jutland) that hold sea-trout, salmon, brown trout and/or grayling and there are lakes that hold pike, perch and more. And if you find yourself in Sealand, South-Swedish waters are also within reach.

This said; I would definitely bring a light single hander, for the occasional small stream fishing, and consider bringing a double hander for salmon and a heavy single hander for pike (I am just fine without the latter two myself...).

Sea-trout on the coast is usually not all that picky, so you are more or less covered with the flies you mention; make sure to have some scrimp and gammarus immitations, high riding dark muddlers for summer nights and some pink stuff for cold winter days.

Cheers,
/atli

Submitted by Stewart Benson on

Permalink

genuine sub species of Brown Trout, different apearance breeding times etc ?

Submitted by Rodolfo Born on

Permalink

Hello Janos: I would like to know more about the rigging that you use for winter fishing and about the standard water knot. I'm from Argentina and fish for trout in winter. Thanks

[b:d42ccbb0bf]'more phly welding pics... here's das [i:d42ccbb0bf]Caped Crusader[/i:d42ccbb0bf]...[/b:d42ccbb0bf]
[img:d42ccbb0bf]http://i198.photobucket.com/albums/aa176/Phracas/P7091264.jpg[/img:d42c…]
[img:d42ccbb0bf]http://i198.photobucket.com/albums/aa176/Phracas/P7091273.jpg[/img:d42c…]
[img:d42ccbb0bf]http://i198.photobucket.com/albums/aa176/Phracas/P7111292.jpg[/img:d42c…]
[img:d42ccbb0bf]http://i198.photobucket.com/albums/aa176/Phracas/P7161303.jpg[/img:d42c…]
[img:d42ccbb0bf]http://i198.photobucket.com/albums/aa176/Phracas/P7161302.jpg[/img:d42c…]
[img:d42ccbb0bf]http://i198.photobucket.com/albums/aa176/Phracas/P7161297.jpg[/img:d42c…]
[img:d42ccbb0bf]http://i198.photobucket.com/albums/aa176/Phracas/P7161298.jpg[/img:d42c…]
Why bother...?!
I was having a particularly challenging time of it, attempting to tame a batch of uncooperative cape feathers...
The quills had a bit of a structural twist to them... when thread tension was applied the shaft would rotate... slightly...
but enough to frustrate my good intentions...
'Welding allows me to position the feather and zap it when things look right...
Sofarsogood... although slick tapered hair [buck tail, etc] presents some durability issues since there isn't much to grab on to for a proper purchase...
[img:d42ccbb0bf]http://i198.photobucket.com/albums/aa176/Phracas/P7251317.jpg[/img:d42c…]
[img:d42ccbb0bf]http://i198.photobucket.com/albums/aa176/Phracas/P7251319.jpg[/img:d42c…]
[img:d42ccbb0bf]http://i198.photobucket.com/albums/aa176/Phracas/P7251320.jpg[/img:d42c…]
[img:d42ccbb0bf]http://i198.photobucket.com/albums/aa176/Phracas/P7251318.jpg[/img:d42c…]
Weshallsee... R&D... a work in progress...

Since you got this far …


The GFF money box

… I have a small favor to ask.

Long story short

Support the Global FlyFisher through several different channels, including PayPal.

Long story longer

The Global FlyFisher has been online since the mid-90's and has been free to access for everybody since day one – and will stay free for as long as I run it.
But that doesn't mean that it's free to run.
It costs money to drive a large site like this.
See more details about what you can do to help in this blog post.